Ride-Str8

The Ride-Str8 organization first and foremost is a company focusing on engineering quality Harley Davidson products such as stabilizer brackets meeting the needs of the the Harley motorcycle enthusiast.  Their stabilizer bracket stabilization kit superb in design increases rider saftey by reducing the rear steer and high speed bagger wobble associated with Harley Davidson FLH & FLT Rubber mount touring bagger motorcycles.  For older Harley Davidson FLHT motorcycles with high speed wobble the Ride-Str8 Axle Adjuster Spacer Block is available.

The cause of swingarm movement that results in wobble and rear-steer is the result of the swingarm mounts anchored using rubber bushings on each side.  As the rubber bushings compress the rear of the bike tracks in a different direction to the front of the bike which creates a sudden mis-alignment between the front and back tires.  This results in the front trying to compensate or counter-steer.  The flex is most noticeable in a sweeping turn and amplified on rough un-even road surface.

To address this problem Ride-Str8 has designed a stabilizer bracket that reduces movement in the horzontal plane and corresponding rear steer or wobble.  The kit has a linkage restriction point between the frame and the transmission which is located 4" behind the swing arm axle.  The axle adjuster block for 1994 to 2001 Harley Davidson FLHT motorcycles prevents damage to the swingarm tube wall by increasing surface contact.

View Ride-Str8 Stabilizer Bracket Kits

True-Track

The True-Track organization is the maker of the original stabilizer bracket for high speed bagger wobble on Harley Davidson FLH & FLT Rubber mount motorcycles.  Beginning in 1996 True-Track identified the rear steer wobble problem designing a stabilizer bracket that reduces the swingarm flex increasing stability.  Over the last 10 years the design has been improved resulting in a stabilization kit for Harley Davidson FLH & FLT Rubber mount touring bagger motorcycles that gives the rider extra confidence.

The True-Track stabilization kit is located 6" in front of the swing arm axle, underneath the transmission oil pan away from the rear wheel axle.  The mounting uses an aluminum caged integration device bolted to the bottom rear transmission oil pan.  This configuration acts as a heat sink.  This device is attached to a linkage and a crossmember keeping the swing arm pivot anchored in position and therefore stable.

View True-Track Stabilizer Bracket Kits

Terry Components

Terry Components is the maker of the Ultra Ride stabilizer bracket. A recent entry into the market rear steer wobble stabizer brackets for Harley Davidson FLH & FLT Rubber mount motorcycles Terry Components produces a stabilizer bracket with a hog bone cage design similar to True-Track.

Call for Availability and pricing